Sales & Support
Request A Quote - Email
Payment & Shipping Terms:
|Material:||Plastic||Charge Voltage:||220V Or Customized|
portable hydraulic power unit,
hydraulic power control unit
18V portable electric hydraulic unit ultra high pressure hydraulic pump station
The compact, lightweight design of this product is lightweight and small.
The handle is generous in design and easy to carry.
Two-stage hydraulic design for high efficiency.
It is equipped with a straight-through solenoid valve to control oil return, and a remote control with extra
High-strength housing protects and protects electrical components from moisture and dirt.
Built-in safety valve for overload protection.
Configure the pressure gauge and visual hydraulic pressure.
Configure 1.5m high pressure tubing and R2 3/8 quick connector and dust cap.
Maximum working pressure: 700bar.
Equipment parameter table
|Pressure||70Mpa||Charging duration||2 hours|
|Hi pressure Flow||0.5L/min||Low pressure Flow||3.5L/min|
|Pump||Piston pump||Oil storage||2.5L|
|Oil type||32# anti-wear hydraulic oil or 7-15 hydraulic transmission oil|
|Features||Pressure overload protection device to avoid overpressure damage of equipment;|
|The charging model is more suitable for field use, more pressure than traditional manual, more oil storage, no need for manual electric drive|
|High and low pressure two-stage output, low pressure reaches 7MPa pressure is automatically jump to high pressure, automatic conversion, no need to manually switch|
|Two 4AH large capacity batteries are durable and suitable for more different hydraulic tools.|
|Instructions||1.Remove the battery and charge it. When charging, be sure to use it after it is full, so as not to reduce the battery life.|
|2.Install the charged battery. Open the dust cover of the quick interface;|
|3.Connect the high pressure fuel line to the quick coupling and connect the hydraulic equipment that needs to work|
|4.Turn on the switch, the device runs and check if the operation is normal.|
Failure and solution
Check power or
|Low or no pressure||1.Overflow valve failure||Adjust or replace the relief valve (70Mpa)|
|2. Oil leakage||Check replacement seal|
|3. Plunger wear||Replace the plunger pair|
|4. Low oil level||Filling hydraulic oil|
|Flow insufficient||Seal wear||Change seal|
|The type of hydraulic oil is wrong||Change right hydraulic oil|
|Low oil level||Filling hydraulic oil|