Payment & Shipping Terms:
|Pressure:||315 Bar||Max. Flow:||120 L/min|
|Fluid Temperature Range:||-30 To +80 (NBR Seal)/-20 To +80 (FKM Seal) ℃|
4-way 3-position, 4-way 2-position and 3-way 2-position directional valve with mechanical, manual operation
- Direct operating directional spool valves with mechanical, manual operation
- For sub-plates mounting
- Hand lever
- Porting pattern confirms to DIN 24 340 form A, and ISO 4401
Function and configurations
Directional Valves with Mechanical and Manual Operation type WMM10...L4X, are the second generation of our series 10 valves, and are direct operated spool valves which switch the flow fluid by rotating the handle to move the spool axially. They have 2-position, 3-position as well as various spool symbols, optional detent device and return spring. And they are sub-plate mounting.
These valves consist of a housing (1), hand lever(2), the control spool (3), one or two return springs (4), and a push rod (5).
In the unoperated condition the control spool (3) is held in the neutral or starting position by the return springs (4). When the hand lever (2) is pushed to right or left, the hand lever (2) acts at the push rod (5) by hinge and direct controls the spool (3), at that time, the spool (3) moves to an expected position. When the handle returns to Zero position, spool returns to normal position by return spring. The switched position is operated by the handle.
Their operating principle is the same as the type WWM.../, and they are fitted with 2 or 3 switched positions and a detent (6), so all the switched position is fixed.
The use of a throttle insert is required, when operating , flows can occur during the switching processes that exceed the performance limit of the valve.
These throttles are to be inserted into the P-channel of the directional valve.
Directional valves type WMM10...L4X have two handles options with different pulling direction, the detail refer to the 'Specification' and 'Unit dimensions'.
|Fluid temperature range||℃||-30 to +80 (NBR seal)|
|-20 to +80 (FKM seal)|
|Max.operating pressure||Port A,B,P||bar||315|
|Flow cross section (switching neutral position)||Type V||mm2||For symbol V 11(A/B to T) 10.3(P to A/B)|
|Type W||mm2||For symbol W 2.5(A/B to T)|
|Type Q||mm2||For symbol Q 5.5(A/B to T)|
|Fluid||Mineral oil suitable for NBR and FKM seal|
|Phosphate ester for FKM seal|
|Viscosity range||mm2/s||2.8 to 500|
|Degree of contamination||Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406|
Unit dimensions (Dimensions in mm)
WMM10...-L4X... K (K version)
1 Standard version: switched position 0 → b
.../K version :switched position 0 → a,b → a
2 Standard version: switched position 0 → a,b → a
.../K version :switched position 0 → b
3 Standard version: switched position a → b
.../K version :switched position a → b
5 O-ring 12×2, for ports A, B, P ,TA and TB
6 Additional return port when using control block
Valve fixing screws:
M6×40, GB/T 70.1-10.9,
MA =15.5 Nm
must be ordered separately